Portable remote tear gas disperser is a new type of non-lethal dispersal and riot control equipment developed in combination with domestic and foreign related products. The equipment uses high-pressure nitrogen as a power source, has a simple structure, is convenient to carry and use, and can be repeatedly filled and used. It is suitable for public security organs and armed police forces to deal with large-scale sudden mass incidents, and can disperse large-scale group targets within a few seconds. It has the advantages of ultra-quiet, high efficiency and safety, simple operation, large coverage and rapid action. It can quickly spread to 150 meters away and has an action space of more than 3000m3. It is the best powerful non-lethal weapon for dealing with mass incidents, riot control, anti-terrorism operations or instantaneous and effective handling of hijacked cases.

main performance index

1. Injection mode: continuous or intermittent injection, mist injection, or jet injection

2. Range: ≥ lOm

3. Coverage area: 2000 ㎡ or more

4. Liquid volume: ≥ 10L

5. Injection time: continuous injection is 18s-30s

6. Working pressure: 12MPa

7. Working temperature:-30 ℃ ~ 50 ℃

8. Weight: ≥ 20Kg

9. Validity period: three years

Product Features

The disperser uses high-pressure nitrogen as the power source, and selects high-quality stainless steel special pressure tank. The injection structure is a combination of fine holes through and tapered injection holes, so that the injection effect has good stability. The special sealing ring can ensure the sealing performance of the pneumatic container. The product has a large volume, moderate air pressure, long spray time and spray distance, so as to ensure the effect and the safety of the police themselves. The equipment is equipped with an external barometer, which can react to the internal air pressure of the tank body, so as to know the reasonable application of the police. Dispelling liquid adopts OC/CS, which is sprayed in the form of jet, is less affected by wind, has no damage to human body and no pollution to the environment.

Method of use

When spraying:

carry its shoulder strap over the shoulder;

Pull out the safety bolt;

Generally, hold the front section of the bracket tightly with the left hand, hold the rear end of the bracket with the thumb of the right hand, and hold the trigger with the other four fingers;

Align the injection port with the target, pull the trigger down with force, and the solvent will be injected into the target immediately;

When in use, according to the site conditions, can be a one-time continuous spray, spray can swing around, can also be intermittent point shot.

When canned:

Remove the pressure gauge and screw in the lengthened screw, which can be used as a wrench to open the tank;

Align the mouth of the 10L solvent bottle with the mouth of the storage tank, introduce the solvent into the bag, and rotate and tighten the storage tank and the bracket;

Insert the safety bolt;

If there is difficulty in self-filling, it can be sent back to our factory for re-filling.

Comparative advantage of this product with other products in the market

When other products are sprayed, people cannot spray downward at a high place, and must be horizontally upward by 5 °, otherwise the compressed air will be emptied immediately and the power will be lost. Jin 'an products use internal binary packaging, high-pressure nitrogen as the power source to press the bag body. There is no direction restriction. Inverted can be sprayed. At the end of the bag, there is no residual solvent in the bag. Other products are solvent and compressed air in the tank body at the same time. Air is on the top and solvent is on the bottom. Use a straw (soft) to suck the solvent below the valve and spray it out. Once the straw head exposes the solvent surface, the compressed air immediately, loss of power will not be able to normal injection.

The product has passed the Ministry of public security special equipment quality supervision and inspection center inspection. Test No.: Public Police Inspection (Committee) No. 1830308.